Example project · Start here
ESP32-C5 blink
A real emulated ESP32-C5 (single RISC-V RV32IMAC at 240 MHz) runs the bundled chip-specific firmware and blinks its onboard G27 RGB pixel. The C5 is the bench’s only dual-band board: its Wi-Fi 6 station sees 5 GHz networks that no other board here can hear, and it also carries an 802.15.4 radio for Thread and Zigbee.
What's on the bench
- Battery
- ESP32-C5-DevKitC-1
How it's wired
- Battery · pos→ESP32-C5-DevKitC-1 · 5v
- Battery · neg→ESP32-C5-DevKitC-1 · gnd
This project runs prebuilt firmware on the emulated board; open it in the simulator to watch it work and inspect every part live.
