Example project · Start here

Arduino Uno R4 blink

Official ArduinoCore-renesas firmware runs on the real emulated RA4M1 and drives the solved 5 V D13 net. The board art includes the live cycle-observed 12×8 matrix and real D13, TX, RX and power lamps.

Open this project in the simulator →All example projects

What's on the bench

Arduino Uno R4
Battery
LED
Resistor

How it's wired

Battery · pos→Arduino Uno R4 · 5v
Battery · neg→Arduino Uno R4 · gnd
Arduino Uno R4 · d13→Resistor · a
Resistor · b→LED · a
LED · k→Arduino Uno R4 · gnd2

The code

This Arduino C++ sketch lives in the Code tab; sign in and press Compile & upload to build real firmware for the emulated board.

// Official-core UNO R4 WiFi Blink fixture. Edit it, then compile
// through the fixed arduino:renesas_uno:unor4wifi server target.
void setup() {
  pinMode(13, OUTPUT);
}

void loop() {
  digitalWrite(13, HIGH);
  delay(500);
  digitalWrite(13, LOW);
  delay(500);
}

Firmware licence

Notice: this firmware uses the LGPL-licensed Arduino core library

arduino-unor4wifi-blink.bin is statically linked with ArduinoCore-renesas 1.6.0, in Breadboard's port of its UNO R4 WiFi variant to Renesas FSP 5.3.0. Parts of that core are licensed under the GNU Lesser General Public License, version 2.1 or (at your option) any later version ("the Library"). Breadboard distributes this firmware under terms that permit you to modify the work for your own use and to reverse engineer it for debugging such modifications.

Relink package: arduino-unor4wifi-blink-relink.zip (344 KB)
Corresponding source: ArduinoCore-renesas-1.6.0-fsp53-source.zip (3.7 MB)
Licence texts and relink instructions

Related projects